TO BUILD A TEARDROP TRAILER
| PLANNING AND CONTRUCTION PHOTOS - PAGE 5 < back | home | next > |
||||||
 |
 |
 |
 |
|||
| 8/03/06 Put window in left sidewall | 8/04/06 Riveted vent in top of trailer | 8/04/06 Put 25 CFM 120 VAC computer fan in bottom of roof vent | 8/08/06 Installed doorframe and test-mounted door | |||
 |
 |
 |
 |
|||
| 8/09/06 Put blue metal on door w/contact cement, pop-rivets | 8/11/06 Installed window in door | 8/31/06 Cut, glued, screwed, pop-riveted sheet metal to 3’L x 4’W flat hatch | 9/05/06 Built/installed metal splash shield behind stove | |||
 |
 |
 |
 |
|||
| 9/05/06 Hatch shown in down position | 9/13/06 Put diamond plate on rear end of trailer | 9/14/06 Put rear diamond plate piece over A/C door on w/glue, screws, and pop-rivets | 9/15/06 Hatch shown in down position | |||