TO BUILD A TEARDROP TRAILER
| PLANNING AND CONTRUCTION PHOTOS - PAGE 4 < back | home | next > |
||||||
 |
 |
 |
 |
|||
| 3/27/06 Wired 120 VAC outlet for top inside shelf and 110 VAC galley lamp | 3/28/06 Installed 3/8” plywood galley countertop | 4/12/06 Installed air conditioner after removing its case | 4/15/06 Built baffle to separate A/C incoming/outgoing air | |||
 |
 |
 |
 |
|||
| 4/24/06 Cut hole in aluminum countertop for dishpan sink; screwed stove on | 4/25/06 Painted galley rear wall, part of countertop, A/C compartment white | 5/16/06 Painted trailer side bracing w/roofing waterproofing compound | 5/16/06 Painted trailer front bracing w/roofing compound | |||
 |
 |
 |
 |
|||
| 6/30/06 Screwed metal right angle to roof/side edge | 7/01/06 Screwed metal right angle to roof/side edges | 7/04/06 Glued/pop-riveted roof on trailer, added 9’ square roof vent | 7/07/06 Glued/riveted blue metal on left sidewall, white metal on left sidewall | |||