I added two fangs made
from tiny slivers cut from sprue, and some groundwork to the base. The
cape parts had to be painted first, then assembled to the completed
figure. The seams where the parts met at the shoulders had to be filled
with epoxy putty, which was textured with an old stiff-haired brush,
moistened with water. Once the putty had set, the area was painted to
match the rest of the cape.
I added two fangs made
from tiny slivers cut from sprue, and some groundwork to the base. The
cape parts had to be painted first, then assembled to the completed
figure. The seams where the parts met at the shoulders had to be filled
with epoxy putty, which was textured with an old stiff-haired brush,
moistened with water. Once the putty had set, the area was painted to
match the rest of the cape.
